|
| Brand Name: | Seacent |
| Model Number: | 1x12 mini module |
| MOQ: | 1 piece |
| Payment Terms: | L/C, T/T, D/P |
| Supply Ability: | 100,000 pieces per month |
FTTH FTTB FTTX Fiber Optic PLC Splitter 1x8 With SC APC Connector
FTTB FTTX Mini Fiber Optic PLC Splitter 1x8 With SC APC Connector
A fiber optic splitter is a passive optical device that enables the distribution of a light signal from an optical fiber to two or more fibers. These splitters are used whenever a light beam transmitted in a network needs to be divided into multiple beams.
When a light signal is transmitted through a single-mode fiber, the light energy cannot entirely concentrate in the fiber core. Some of the energy will spread through the fiber cladding. If two fibers are close enough to each other, the transmitting light in one fiber can enter into another optical fiber. This technique of reallocating an optical signal among multiple fibers is what enables the function of a fiber optic splitter.
Appliacation:
Specifications:
| Item | Parameter |
|
IL(dB) |
≤12.5 |
|
Uniformity (dB) |
≤1.0 |
|
PDL (dB) |
≤0.25 |
|
RL(dB) |
≥55 |
|
Directionality (dB) |
≥55 |
|
Fiber length (m) |
1.0 or customized |
|
Temperature stability (dB) |
-40℃- 85℃(≤0.5) |
|
Working temperature |
40℃- 85℃ |
|
Fiber type |
G657A1 or customized |
Note: The above IL is without the connector parameters.
1XN with connector optical splitter insertion loss in the above requirements in addition to 1X2 increase does not exceed 0.2dB, the remaining increase does not exceed 0.3dB.
Ordering information:
|
Product type |
Inlet and exit diameter |
Inlet and fiber length |
size |
|
1XN or 2XN 0102=1X2 0103=1X3 0104=1X4 0105=1X5 0106=1X6 0107=1X7 0108=1X8 0112=1X12 0116=1X16 0124=1X24 0132=1X32 0164=1X64 1128=1X128 |
2=0.9mm |
0=0.5M 1=1.0M 2=1.5M 3=2.0M 4=2.5M S=Customized |
1x2 to 4x7x60mm 1x8
1x12 to 4x12x60 mm 1x16
1x24 to 6x20x80 mm 1x32
1x64 6x40x100 mm |
Advantages Of PLC Optical Splitter
1. Adopt high strength stainless steel, pass salt spray test
2. Ferrule core is less than 0.2um
3. Adopt 100% new raw material, ROHS compliance
4. Low Insertion loss
5. Low PDL Compact Design
6. Good channel-to-channel uniformity
7. Wide Operating Wavelength: from 1260nm to 1650nm
8. Wide Operating Temperature: from -40℃ to 85℃
|
|
| Brand Name: | Seacent |
| Model Number: | 1x12 mini module |
| MOQ: | 1 piece |
| Payment Terms: | L/C, T/T, D/P |
FTTH FTTB FTTX Fiber Optic PLC Splitter 1x8 With SC APC Connector
FTTB FTTX Mini Fiber Optic PLC Splitter 1x8 With SC APC Connector
A fiber optic splitter is a passive optical device that enables the distribution of a light signal from an optical fiber to two or more fibers. These splitters are used whenever a light beam transmitted in a network needs to be divided into multiple beams.
When a light signal is transmitted through a single-mode fiber, the light energy cannot entirely concentrate in the fiber core. Some of the energy will spread through the fiber cladding. If two fibers are close enough to each other, the transmitting light in one fiber can enter into another optical fiber. This technique of reallocating an optical signal among multiple fibers is what enables the function of a fiber optic splitter.
Appliacation:
Specifications:
| Item | Parameter |
|
IL(dB) |
≤12.5 |
|
Uniformity (dB) |
≤1.0 |
|
PDL (dB) |
≤0.25 |
|
RL(dB) |
≥55 |
|
Directionality (dB) |
≥55 |
|
Fiber length (m) |
1.0 or customized |
|
Temperature stability (dB) |
-40℃- 85℃(≤0.5) |
|
Working temperature |
40℃- 85℃ |
|
Fiber type |
G657A1 or customized |
Note: The above IL is without the connector parameters.
1XN with connector optical splitter insertion loss in the above requirements in addition to 1X2 increase does not exceed 0.2dB, the remaining increase does not exceed 0.3dB.
Ordering information:
|
Product type |
Inlet and exit diameter |
Inlet and fiber length |
size |
|
1XN or 2XN 0102=1X2 0103=1X3 0104=1X4 0105=1X5 0106=1X6 0107=1X7 0108=1X8 0112=1X12 0116=1X16 0124=1X24 0132=1X32 0164=1X64 1128=1X128 |
2=0.9mm |
0=0.5M 1=1.0M 2=1.5M 3=2.0M 4=2.5M S=Customized |
1x2 to 4x7x60mm 1x8
1x12 to 4x12x60 mm 1x16
1x24 to 6x20x80 mm 1x32
1x64 6x40x100 mm |
Advantages Of PLC Optical Splitter
1. Adopt high strength stainless steel, pass salt spray test
2. Ferrule core is less than 0.2um
3. Adopt 100% new raw material, ROHS compliance
4. Low Insertion loss
5. Low PDL Compact Design
6. Good channel-to-channel uniformity
7. Wide Operating Wavelength: from 1260nm to 1650nm
8. Wide Operating Temperature: from -40℃ to 85℃
